Canon Addict

Canon EOS R3, R5 Mark II, R5, R6, R6 Mark II, R8, R10, R50, and R100 Firmware Updates Released

By Louis Ferreira | Published: September 26, 2024

EOS R3 Firmware Update, Version 1.8.0
Firmware Version 1.8.0 incorporates the following enhancements and fixes:
1. Adds [Protect Images] and [Rating] during FTP Transfer.
2. Adds the ability to select [Wired] as a connection option when [Airplane mode] is set to [On].
3. The following issues have been fixed.
3-1.Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
3-2.Fixes an issue, in which when shooting subjects that are smaller in the frame, the card access indicator blinks and operations can no longer be performed.
3-3.Fixes an issue, in which while operating both the touch function on the LCD monitor and a customized button, and then performing shooting, operations can no longer be performed.
3-4.Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R5 Mark II Firmware Update, Version 1.0.1
Firmware Version 1.0.1 incorporates the following fixes:
1. Fixes an issue in which movies captured in RAW/SRAW format may not play back properly on applications due to the attached lens and camera not communicating.
2. Improves the stability of the touch operation control when the [Touch control] is set to [Sensitive].
3. Fixes an issue in which the camera’s LCD display may become abnormal after the camera resumes operations from the [Viewfinder off] state.
4. Fixes an issue in which the camera may stop working properly when the shutter button is operated while the BUSY message is being displayed on the screen.
5. Fixes an issue in which Err70 may be displayed when the display mode is switched between the LCD screen and viewfinder while the BUSY message is being displayed on the screen.
6. Fixes an issue, in which the camera’s LCD display becomes abnormal after using EOS Utility to capture and import movies.
7. Fixes an issue, in which movies captured using EOS Utility may not be played back on the camera.
8. Optimizes the auto white balance for specific environments when the Custom Picture function is set to [On].

EOS R5 Firmware Update, Version 2.1.0
Firmware Version 2.1.0 incorporates the following enhancements and fixes:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. The following issues have been fixed.
3-1. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
3-2. Fixes an issue, in which when shooting subjects that are smaller in the frame, the card access indicator blinks and operations can no longer be performed.
3-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R6 Mark II Firmware Update, Version 1.5.0
Firmware Version 1.5.0 incorporates the following enhancements and fixes:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. Adds support for the “Peripheral Coordinated Control”. Peripheral Coordinated Control is now always performed when a compatible lens is attached (there is no need to set it on the menu screen).
* Peripheral Coordinated Control is a function that reduces changes in distortion around the periphery of the image caused by camera shake, which tends to occur with wide-angle lenses.
4. The following issues have been fixed.
4-1. Fixes an issue, in which when performing continuous shooting using the electronic shutter with both the [High-Frequency Anti-Flicker Shooting] and [OVF sim. view assist] options set to [On], Err 70 may occur.
4-2. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
4-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R6 Firmware Update, Version 1.9.0
Firmware Version 1.5.0 incorporates the following enhancements and fixes:
1. Enables functions to be used without limitation in conjunction with the new Battery Pack LP-E6P.
This makes it possible to shoot at the same continuous shooting speed as when using LP-E6NH.
In-camera charging of LP-E6P is also supported.
2. Adds [Protect Images] and [Rating] during FTP Transfer.
3. Adds support for the “Peripheral Coordinated Control”. Peripheral Coordinated Control is now always performed when a compatible lens is attached (there is no need to set it on the menu screen).
* Peripheral Coordinated Control is a function that reduces changes in distortion around the periphery of the image caused by camera shake, which tends to occur with wide-angle lenses.
4. The following issues have been fixed.
4-1. Fixes an issue, in which when performing continuous shooting using the electronic shutter with both the [High-Frequency Anti-Flicker Shooting] and [OVF sim. view assist] options set to [On], Err 70 may occur.
4-2. Fixes an issue, in which when Wi-Fi is disconnected, Err 70 occurs.
4-3. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R8 Firmware Update, Version 1.4.0
Firmware Version 1.4.0 incorporates the following enhancements and fixes:
1. Adds the ability to select [WPA2] and [WPA3] as a secured protocol.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. The following issues have been fixed.
3-1. Fixes an issue, in which when performing continuous shooting using the electronic shutter with both the [High-Frequency Anti-Flicker Shooting] and [OVF sim. view assist] options set to [On], Err 70 may occur.

EOS R10 Firmware Update, Version 1.6.0
Firmware Version 1.6.0 incorporates the following enhancements and fixes:
1. Adds the ability to select [WPA2] and [WPA3] as a secured protocol.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. The following issues have been fixed.
3-1. Fixes an issue, in which when SPEEDLITE EL-5, EL-10 is attached, the “Accessory unavailable status” message may be displayed when restarting after the camera has gone into Auto Power Off. (Only occurs with firmware Ver.1.5.0)
3-2. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R50 Firmware Update, Version 1.3.0
Firmware Version 1.3.0 incorporates the following enhancements and fixes:
1. Adds the ability to select [WPA2] and [WPA3] as a secured protocol.
2. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).
3. The following issues have been fixed.
3-1. Fixes an issue, in which when performing shooting in high-speed continuous shooting + mode with the [Highlight Tone Priority] option set to [ON], focus may not be achieved when certain ISO speed settings are used.

EOS R100 Firmware Update, Version 1.1.0
Firmware Version 1.1.0 incorporates the following enhancement:
1. Adds support for the Software Development Assistance Kit (EDSDK/CCAPI).

Follow Canonaddict on Facebook, X/Twitter, Instagram, and YouTube

Posted in Canon EOS R10, Canon EOS R100, Canon EOS R3, Canon EOS R5, Canon EOS R5 Mark II, Canon EOS R50, Canon EOS R6, Canon EOS R6 Mark II, Canon EOS R8, Firmware | Comments closed

Canon Powershot 10 White Announced in China

By Louis Ferreira | Published: September 25, 2024

The Canon Powershot 10 has been out for a bit now, but they just announced a white version in China. It is unknown at this time if other regions will get a white edition, but there is currently Black and Silver available globally.

Canon Powershot 10: B&H Photo / Amazon / Adorama

Posted in Canon Compacts | Tagged Canon Powershot 10 | Comments closed

Viltrox Announces Global Photo Contest 2024

By Louis Ferreira | Published: September 24, 2024

Viltrox Announces Global Photo Contest for 2024
Viltrox is excited to announce the 2024 Viltrox Image Awards (VIA), a global photo contest inviting photographers of all skill levels to showcase their creativity using Viltrox lenses. Participants can submit entries in diverse categories, with opportunities to win significant prizes, including $10,000 for the Master Award. The contest runs from September 5, 2024, to March 31, 2025, offering international recognition and a platform for photographers to share their unique perspectives. Visit the official website for submission guidelines and details.

Posted in 3rd Party Lenses, Press Release | Tagged Viltrox | Comments closed

Canon Speedlite EL-5 Recalled

By Louis Ferreira | Published: September 23, 2024

Canon Speedlite EL-5: B&H Photo / Amazon / Adorama

Information on free repairs for the Speedlite EL-5 strobe
September 19, 2024

Canon Marketing Japan Inc.

Thank you for your continued patronage of Canon products.

We have discovered that the following phenomenon occurs with the Speedlite EL-5 flash. We would like to inform you of the details of this issue and our response.

We sincerely apologize to customers who use this product for any inconvenience caused. We will implement even more thorough quality control measures in the future so that customers can use our products with peace of mind, and we appreciate your understanding.

phenomenon
Some parts of this product may consume battery power quickly when the power is turned off. If a fully charged battery is inserted and the power is turned off, the battery may run out in about two days.

Selected products
The affected products are the “Speedlite EL-5” flash units with a “0” as the fourth digit from the left of their serial numbers, and in which the above phenomenon occurs.

Response
If the product in question exhibits this phenomenon, we will inspect and repair it free of charge. However, please note that there may be cases where inspection and repair for other phenomena than those mentioned above may be charged, even if the product in question is in the category of subject products.

Free repair acceptance period
Until September 30, 2026

About application
For repair requests, please click the “Go to application form” button below to apply. Our designated courier will deliver the necessary packaging materials at the date and time you specify, so please use them to pack and ship the equipment.

To the application form

When making a request, please only bring the strobe body. Please keep all other accessories such as batteries, battery chargers, and accessories (strobe cases, etc.) on hand.

Storage period

Please note that it will take approximately 10 days to 2 weeks.
* The return date may change depending on the congestion situation.

Contact for this matter
Please contact the “Speedlite EL-5 Call Center” listed below.

Telephone enquiries
Speedlite EL-5 Call CenterTelephone number:　0120-101-418 (toll free) Reception hours: Weekdays and Saturdays 9:00-17:00
*We will be closed from December 31st to January 3rd.

via Canon.jp

Posted in Canon Flash | Tagged Canon Speedlite EL-5, Recall, Recalled, Speedlite EL-5 | Comments closed

Godox iM30 Camera Flash Compact, Powerful, and Versatile Announced

By Louis Ferreira | Published: September 21, 2024

Godox iM30: B&H Photo / Amazon

Godox Released iM30 Camera Flash Compact, Powerful, and Versatile
Godox has released the iM30, a new consumer-grade camera flash, on September 20th. Designed for photographers who require both portability and performance, the iM30 offers an efficient lighting solution in a compact form factor. This flash is suitable for various photographic needs, delivering high-quality lighting in a user-friendly package.

Key Features:

Compact and User-Friendly
Weighing just 78g and small enough to fit in the palm of your hand, the iM30 is easy to carry, ensuring that portability never compromises performance.
Superior Lighting Performance
With a guide number of 15 (ISO 100, meters), the iM30 delivers bright and natural fill light, significantly improving the quality of shots in various environments.
Seven Power Levels
The iM30 offers seven adjustable power levels (1/64 to 1/1), providing flexibility to adapt to different lighting conditions, making it suitable for diverse shooting scenarios.
Efficient Power Management
Powered by two AAA batteries, the iM30 delivers up to 230 flashes on a single charge, ensuring reliability and consistent performance throughout shoots.
Quick and Simple Operation
With a single-contact hot shoe design, the iM30 is easy to attach and use with a wide range of cameras, offering a plug-and-play experience without the need for complex setup.

Godox’s release of the iM30 highlights their commitment to delivering innovative, consumer-focused lighting solutions. This flash enhances their product lineup by offering photographers a portable, powerful, and reliable tool that meets the demands of a wide range of shooting situations.